Planetary Gear Motor GMP36
The GMP36 Planetary Gear Motor series combines a 36 mm-class planetary gearbox with PMDC motors to provide compact, high-torque drive options for equipment where installation space, load capability, transmission stability, and controllability are important. The available source data includes 12 VDC and 24 VDC configurations, with gearmotor output speeds from 60 to 200 RPM in the listed rated conditions and rated torque up to 2.5 N·m. The planetary structure is suited to applications such as robotics, industrial automation, smart home equipment, automotive electronic actuators, medical devices, commercial equipment, and smart agriculture mechanisms.
Product Overview
The GMP36 Planetary Gear Motor series combines a 36 mm-class planetary gearbox with PMDC motors to provide compact, high-torque drive options for equipment where installation space, load capability, transmission stability, and controllability are important. The available source data includes 12 VDC and 24 VDC configurations, with gearmotor output speeds from 60 to 200 RPM in the listed rated conditions and rated torque up to 2.5 N·m. The planetary structure is suited to applications such as robotics, industrial automation, smart home equipment, automotive electronic actuators, medical devices, commercial equipment, and smart agriculture mechanisms.
Model Information
| Series | Motor Type | Product Category |
| GMP36 | PMDC Motor | Planetary Gear Motor |
Main Parameters
Gearmotor Technical Data
| Model | Ratio | Rated Voltage | No-load Speed | No-load Current | Rated Speed | Rated Current | Rated Torque | Stall Current | Stall Torque |
| GMP36M545-139K | 1:139 | 24 VDC | 75 RPM | ≤450 mA | 60 RPM | ≤2200 mA | 2.5 N·m / 25 kgf·cm | ≤15500 mA | 12.5 N·m / 125 kgf·cm |
| GMP36M555-27K | 1:27 | 24 VDC | 250 RPM | ≤250 mA | 200 RPM | ≤1250 mA | 0.45 N·m / 4.5 kgf·cm | ≤8500 mA | 3.0 N·m / 30 kgf·cm |
| GMP36M575-4K | 1:4 | 12 VDC | 113 RPM | ≤280 mA | 95 RPM | ≤1250 mA | 0.3 N·m / 3.0 kgf·cm | ≤7850 mA | 0.9 N·m / 9.0 kgf·cm |
PMDC Motor Reference Data
| Motor | Motor Length | Rated Voltage | No-load Speed | No-load Current | Rated Speed | Rated Current | Rated Torque | Stall Current | Stall Torque |
| SL-545 | 60.2 mm | 24 VDC | 16000 RPM | ≤320 mA | 9300 RPM | ≤1200 mA | 32 mN·m / 320 gf·cm | ≤14500 mA | 250 mN·m / 2500 gf·cm |
| SL-555 | 61.5 mm | 24 VDC | 8000 RPM | ≤150 mA | 6000 RPM | ≤1100 mA | 28 mN·m / 280 gf·cm | ≤8000 mA | 240 mN·m / 2400 gf·cm |
| SL-575 | 70.5 mm | 12 VDC | 3500 RPM | ≤350 mA | 2600 RPM | ≤1100 mA | 26.5 mN·m / 265 gf·cm | ≤5200 mA | 210 mN·m / 2100 gf·cm |
Dimension Drawing
Main Applications
AI Robots
Robot joints, wheel drives, grippers, dexterous-hand mechanisms, mobile chassis, and other compact mechanisms requiring higher torque density.
Focus: Evaluate continuous torque, peak torque, reverse impact, backlash, temperature rise, and feedback requirements.
Industrial Automation
Small robot joints, AGV/AMR wheel drives, electric fixtures, tightening tools, and precision positioning mechanisms.
Focus: Axial/radial shaft load, start-stop frequency, bearing life, backlash, and duty cycle should be verified.
Smart Home
Electric curtains, window openers, lifting mechanisms, and other compact actuators requiring stable low-speed output and adequate load capability.
Focus: Match ratio to required action time and torque; validate noise and position repeatability in the complete mechanism.
Automotive Electronics
Seat adjustment, powered tailgate, door-drive and similar compact actuator mechanisms.
Focus: Frequent reversing, peak load, vibration, temperature variation, backlash, and feedback configuration should be evaluated.
Medical Equipment
Rehabilitation equipment, precision adjustment mechanisms, medical robots, and other compact drive modules requiring stable output.
Focus: Low noise, low vibration, repeatability, life consistency, and interface requirements should be validated at system level.
Smart Agriculture & Gardening
Mower wheel drives, pruning-tool mechanisms, picking actuators, and lifting/adjustment structures.
Focus: Consider slope, shock load, dust, moisture, vibration, shaft sealing and outdoor protection at system level.
Commercial & Office Equipment
Coffee-machine mechanisms, cash-handling equipment, ticketing terminals, automatic pickup mechanisms and similar compact drives.
Focus: High-cycle operation should be tested with the real load profile, including current, temperature rise, noise and backlash change.
Customization Range
Electrical Configuration
Rated voltage and motor selection based on target speed, torque, current, and duty cycle.
Performance Matching
Gear ratio, output speed, continuous / starting / peak torque, current limit, and load margin.
Mechanical Interface
Output shaft shape and length, mounting flange, gearbox length, bearing configuration, and installation interface.
Feedback Options
Hall sensor or encoder configuration can be evaluated according to speed, position, or stall-detection requirements.
Backlash / Noise Optimization
Gear precision, assembly fit, lubrication, speed matching, and complete-product resonance can be evaluated.
Reliability Validation
Frequent start-stop, reverse impact, temperature rise, axial/radial load, vibration, shock, and application-specific life cycle.
FAQ
Q1. What applications are planetary gear motors best suited for?
Planetary gear motors are ideal for applications that require high torque density, compact size, stable transmission, and relatively low backlash. Typical applications include robot joints, grippers, AGV/AMR wheel drives, medical devices, automotive actuators, smart home mechanisms, and industrial automation equipment.
Q2. How should I choose the gear ratio and output torque?
The gear ratio should be selected based on the required output speed, load torque, motor speed, operating time, and duty cycle. A ratio that is too low may not provide enough torque, while an excessively high ratio may reduce output speed and increase transmission stages, noise, cost, and mechanical losses. Continuous, starting, and peak torque should all be evaluated during selection.
Q3. Can planetary gear motors be used for precision positioning?
Yes. Planetary gear motors can be designed with controlled backlash and combined with encoders or Hall sensors for position and speed feedback. However, final positioning accuracy also depends on gearbox backlash, sensor resolution, mechanical stiffness, assembly tolerances, and the control algorithm, so system-level validation is recommended for precision applications.
Q4. How do you evaluate reliability and service life?
Reliability should be validated under the customer’s actual operating conditions, including load, start-stop frequency, reversing cycles, temperature, shock, vibration, and duty cycle. Key performance items such as speed, current, torque, temperature rise, noise, backlash, and gear wear can be monitored during life testing.
Q5: How do I place an order with Shunli Motor?
Please send us your application requirements or motor specifications. Our engineering team will develop a suitable solution, confirm the technical details, and provide samples for evaluation. Once the samples are approved, we will arrange mass production. Shipping methods can be selected based on your delivery requirements.
Product Categories
Enable Customized Solutions to Be Implemented Faster
Whether you're in the product concept, prototype development, or mass production phase, Shunli Motors can help you find the right micro geared motor drive solution based on your specific application needs.
Submit your product requirements now and get selection advice from our engineers.
Related Products
The Spur Gear Motor combines a DC motor with a multi-stage spur gearbox to provide a mature, efficient, and cost-effective drive solution for compact transmission mechanisms. Its simple gear structure supports flexible ratio, shaft, and mounting customization, making it suitable for smart home devices, commercial equipment, automotive actuators, smart landscaping systems, and industrial automation. It is a practical choice for projects that need a balance of output speed, torque, reliability, manufacturability, and cost.
The GM12 Series is a compact 12 mm-class DC spur gear motor platform developed for miniature mechanisms that require efficient speed reduction, controlled output, and cost-effective integration in limited space.
The GM13AM Series is a compact 13 mm-class DC spur gear motor designed for miniature mechanisms that require efficient speed reduction, stable low-speed output, and cost-effective transmission in a limited installation space.
The Planetary Gear Motor uses a compact coaxial planetary gearbox to deliver higher torque density and stable transmission within limited installation space. Multiple planet gears share the load, making the structure suitable for applications that require compact size, reliable load handling, and frequent start-stop or reversing motion. It is widely used in robotics, medical equipment, industrial automation, automotive actuators, precision mechanisms, and other compact motion systems. Final selection should consider output speed, continuous and peak torque, duty cycle, backlash, current, and installation requirements.
The DC Worm Gear Motor combines a DC motor with a worm gearbox to provide right-angle transmission, high reduction ratios, low-speed output, and strong load-driving capability in a compact structure. Its 90° output arrangement is well suited to valves, lifting and adjustment mechanisms, doors and windows, vending equipment, and other actuators where space layout or load-holding performance is important. Depending on the gear geometry and operating conditions, some worm gear designs may provide holding or self-locking characteristics, which should be verified for the actual application.
The GM16 Series is a compact 16 mm-class DC spur gear motor platform designed for miniature transmission systems that require efficient speed reduction, controlled low-speed output, cost-effective construction, and repeatable mass production.
The GM25AM310/370 is a 25 mm-class DC spur gear motor platform combining a compact multi-stage gearbox with PMDC 310 or 370 motors. The supplied technical data covers gearbox options from 3 to 8 stages, multiple reduction ratios, and two reference gearmotor configurations: GM25AM310-217K at 3 VDC and GM25AM370-99K at 12 VDC.
The GM24 Series is a compact 24 mm-class DC spur gear motor platform developed for small transmission mechanisms that require efficient speed reduction, stable output, and cost-effective mass production.
Navigation
Navigation
Product Categories
Product Categories
Contact Us
Get in Touch
Get in Touch
Request a Quote
Youtube
Tiktok
Linkedin
Instagram
Facebook
WhatsApp
WeChat
